Power Shield Centurion Rackmount 6000L – PSCER6000L

powe shieldCenturion Rackmount
6000L

The Centurion resolves utility power problems and delivers superior power to equipment requiring critical power.

As a True Online Double-conversion UPS, the UPS takes the AC signal, converts it to DC and then back to AC, thus eliminating any noise or electrical interference and delivering perfect
240Vac and 50Hz frequency to all equipment. It is this seamless transfer to batteries that will continue to feed equipment in the case of a mains failure.

The Centurion Rackmount UPS comes complete with NetGuard® software to enable the UPS to softly shutdown the system after a prescribed amount of time designated by the user.

Product Brochure

SKU: PSCER6000L Categories: , Tag:

• Manufacturing
• Servers and networking gear
• Telecommunications, VoIP & security systems
• Medical systems
• Mining applications

• True double-conversion
• Wide input voltage range
• Input power factor correction 0.99
• 50Hz/60Hz frequency converter mode
• Emergency power off function (EPO)
• Eco-mode operation for energy saving (ECO)
• Generator compatible
• Backup time for all models is easily extended by simply plugging additional battery banks
• Charger capacity expansion to 8A for long run models
• USB+RS232 + SNMP + AS400 multiple communications
• Maintenance bypass available for all models

PRODUCT DETAILS
• Model : PSCER6000L
• Capacity : 6000VA / 4800W
• Topology : True online double-conversion

INPUT
• Voltage range
Low Line Transfer : 176 VAC @ 100% load 110 VAC @ 50% load
Low Line Comeback : 186 VAC @ 100% load 120 VAC @ 50% load
High Line Transfer: 300 VAC
High Line Comeback : 290 VAC
• Frequency Range : 46~54 Hz – 50Hz / 56~64Hz – 60Hz
• Phase : Single phase with ground
• Power Factor : 0.99 @ 100%load

OUTPUT
• AC Voltage Regulation (Batt. Mode) : ± 1%
• Frequency Range (Synchronized) : 46~54Hz – 50Hz/56~64Hz – 60Hz
• Frequency Range (Batt. Mode) : 50Hz ± 0.1Hz or 60Hz ± 0.1Hz
• Load Crest Factor : 3:1
• Harmonic : 3% THD (Linear Load)
Distortion 6 % THD (Linear Load)
• Transfer Time AC Mode to Batt. Mode : Zero
• Transfer Time Inverter to Bypass : Zero
• Waveform (Batt. Mode) : Pure Sinewave

EFFICIENCY
• ECO Mode : 90%
• Battery Mode : 88%

BATTERY
• Battery Type : 12V*9AH(x20 external cabinet)
• Typical Recharge : 3 hours recovery to 90% capacity Time
• Charging Current : 2.0A (max.)
• Charging Voltage : 273.0 VDC ± 1%

PROTECTION
• Full protection : Overload, discharge, thermal, short circuit and overcharge protection

COMMUNICATIONS & MANAGEMENT
• Interface : USB or RS232 as standard, Intelligent slot for PSSNMP or PSAS400 dry contact Modbus
• Software : Power Shield NetGuard Software – supports Windows based operating Systems, Linux, Unix & Mac
• LCD Display : UPS Status, Load Level, Battery Level, Alarm Input/Output Voltage, Battery Time Remaining and Fault Indicators
• Audible Alarm : Battery Mode, Low Battery, Overload, Fault

PHYSICAL
• Dimensions : 580(D) x 438(W) x 133(H) (3RU) mm
• Weight : 17kg

OPERATING ENVIRONMENT
• Temperature : 0 – 40°C
• Humidity : 20-90% (RH Non-condensing)
• Noise Level : Less than 55dBA @ 1 Meter

COMPLIANCE
• Safety : EN62040-1-1 2003, IEC60950-1-1
• EMS : EN62040-2 2006
• RoHS : Directive 2001 / 65 / EU

• The only UPS designed for Australians for Australian conditions.
• Highest surge rating of any UPS sold in Australia.
• All units have Australian sockets.
• Units have been tested in hot conditions.
• Local stock – PowerShield holds stock in their warehouses in Wetherill Park, NSW and Malaga, WA.
• Two year warranty with opportunity to increase warranty period.