NetComm NTC-6200

NetComm_WirelessIntelligent M2M Router

PERFECT FOR

  • Point-to-point or point-to-multipoint machine-to-machine IP connectivity
  • Controlling and monitoring of connected machines from remote locations
  • Collection and analysis of data from connected machines
  • Commercial and Industrial deployments in harsh environments

Product Brochure


PROCESSOR & STORAGE
• Powerful 450Mhz ARM9 processor with 64MByte DDR2 Ram
• 256MByte Flash memory storage (~120MB available on board space for user storage)

OPERATING SYSTEM
• Embedded Linux 3.6

PEAK DATA SPEED
• HSDPA/HSUPA data rates: DL: 7.2 / 14.4 Mbps, UL: 2.0 / 5.76 Mbps (Concurrent data rate: DL: 7.2 Mbps, UL: 5.76 Mbps)
• UMTS data rates: DL: max. 384 kbps, UL: max. 384 kbps
• EDGE class 12: DL: max. 237 kbps, UL: max. 237 kbps
• GPRS class 12: DL: max. 85.6 kbps, UL: max. 85.6 kbps
• CSD data transmission 14.4 kbps, V.110

CELLULAR BANDS
• UMTS/HSDPA/HSUPA: 800/850/900/2100/1900 MHz
• GSM/GPRS/EDGE: 850/900/1800/1900 MHz

CONNECTIVITY
• 1x (RJ-45) 802.3af Power over Ethernet (PoE) 10/100Base-TX Port with Auto MDIX
• 1x RS232 Serial Port DB-9 female DCE supporting either 9 wire RS232 or RS485/RS422 (software selectable).
• Software controlled termination resistors for RS485
• Mini USB 2.0 OTG interface with 0.5A supply capability
• 3 X multipurpose I/O pins

SIM CARD READER
• Lockable Tray Reader with Push-Button-to-Release
• Supports Mini USIM/SIM Format (2FF)

RESET BUTTON
• Reset button (recessed, requiring pen/paperclip) with three functions: Reboot, reboot into recovery mode, and reset unit to factory defaults

ANTENNA CONNECTORS
• 2x SMA connectors for 2G/3G (1x Main and 1x RX Diversity)
• 1x SMA connector for GPS

LED INDICATORS
• 8x tri-colour LEDs. Power, Network and 5x Signal Strength indicators
• Easy and clear LED status display for connection status, connected network type, and connection errors

CELLULAR
• Profile managed packet data connections
• NAT Disable for framed route configuration
• Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device
• SIM Security Management (PIN configuration, enable and disable)
• Automatic and manual cellular band selection
• Automatic and manual operator selection

GPS
• Embedded GPS receiver (1575.42Mhz)
• SMA Connector for external passive or active GPS Antenna
• Active antenna voltage: 3.05V
• Maximum current: 50mA
• Short circuit protection
• Tracking sensitivity under open sky: -159dBm
• Acquisition sensitivity under open sky: -149dBm
• Cold start sensitivity: -145dBm
• Time to first fix (TTFF): Cold 25s, Warm 10s typical
• Redirect NMEA stream to serial for forward over IP
• Odometer reading available via Web-UI, CLI and SDK

ZIGBEE
• Operating frequency: 2.4GHz
• Output power (max): 22dBm
• Internal antennas x 2
• Chipset: Silicon Labs EM357

NETWORK & ROUTING
• Static Routing, RIP (v1/v2), Port Forwarding and DMZ
• Dynamic DNS
• VRRP for redundant router failover
• DHCP Server, including :
o Address reservation by MAC address
o Custom DNS server definitions
o DHCP Relay
o DHCP list display in Web-UI
o Advanced DHCP Option configuration (Option 42 NTP,
Option 66 TFTP, Option 150, Option 160)

ADMINISTRATION & CONFIGURATION
• Web-based User Interface (HTTP/HTTPS) for full device status and configuration
• Password protected configuration file backup and restore for quick device configuration and device cloning
• Telnet Command Line Interface for status monitoring, configuration and control
• SNMP v1/v2 including cellular specific MIB, config and firmware download
• TR-069 Client for remote device configuration, configuration backup and restore, and firmware upgrade
• SMS Client (Send/Receive) including inbox, outbox
• Ping monitor watchdog (Reset connection on repeated ping failure)
• Diagnostic Log Viewer (remote and local)
• System Status and Security Logs
• NTP Server Support for network time sync of device’s system clock
• Device User Guide stored on the device and accessible via the Web-based User Interface (HTTP/HTTPS)
• Advanced Diagnostics and Control via SMS
o Query status information – such as Signal Strength, WAN IP, Uptime, and many more
o Configure device remotely via SMS – such as APN, authentication settings, and many more
o Execute commands via SMS – such as reboot, reset to defaults, go offline, and many more
o Secure SMS management using sender whitelisting and password management
o SMS acknowledgement replies for queries and commands

VPN
• PPTP Client for VPN connectivity to remote PPTP VPN Server
• IPSec tunnel termination (for up to 5 tunnels)
• GRE Tunnelling
• OpenVPN (Client, Server and P2P)

FIRMWARE MANAGEMENT
• Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/HTTPS, SNMP, TR-069)
• Multiple firmware image storage on device & dynamic install
• Triggered firmware upgrade via SMS (initiate download & install from HTTP/HTTPS)

SOFTWARE DEVELOPMENT KIT
• Develop and install custom software applications
• Open Linux standard development environment
• Develop applications/scripting in standard ANSI C/Shell script and LUA
• Package manager built into Web-UI for Application installation/removal
• API (C, LUA and Shell libraries) to the unit’s internal Runtime Database to allow full status monitoring configuration and control of the device from custom applications

TEMPERATURE
• Operating Temperature Range: -40°C ~ +85°C
• Storage Temperature Range: -40°C ~ +95°C

POWER SUPPLY
• Power input and I/O’s via 6 way termination block receptacle (Deca ME050-350)
• Field terminable power input via screw type terminal block included (Deca ME420-350) (No. 3 flat-head screwdriver required)
• DC Power (8 – 40V DC) or via 802.3af Power over Ethernet (PoE)
• 1 X dedicated ignition input on 6 way connector
• Recommended power input rating of 6W via DC terminal block (e.g 12V 1.5A), or Class 3 Power Level via PoE
• Vehicle compatible protection on DC Input Jack. (ISO7637 standard)
• Dual power mode supported (PoE primary, seamless failover to DC Jack on PoE loss)

DIMENSIONS, WEIGHT & MOUNTING
• Device dimensions (excluding external antenna): 143mm(L) x 107mm(W) x 34mm(D) / 221g (254g with bracket)
• Wall mount support in multiple orientations via embedded mounting holes
• DIN Rail mount support via plastic bracket included in box (Top hat section rail TH 35 IEC60715)

REGULATORY COMPLIANCE
• FCC, PTCRB, CE, GCF, WEEE, RoHS, A-Tick, IC, e-mark

  • Penta-band 3G with quad-band 2G auto-fallback
  • HSPA+ up to 14.4 Mbps DL
  • Ethernet port with full passive Power over Ethernet (PoE) support (802.3af)
  • RS232/RS422/RS485 Port and USB 2.0 OTG port
  • Built in GPS supporting an active or passive GPS Antenna via external SMA connector
  • Three multi-purpose I/O ports
  • One dedicated ignition input
  • Intelligent, Tri-Colour LED display for clear, easy to read modem status information
  • Extensive device management with support for TR-069, Web GUI and full feature management with SMS
  • Flexible mounting suitable for in-home use or industrial applications with built-in wall mount and DIN rail mounting options
  • Integrated ZigBee multipoint mesh wireless networking

Diagram
A robust and intelligent penta-band 3G and quad-band 2G M2M router, the NetComm NTC-6200, has been designed for Machine-to-Machine (M2M) applications
taking advantage of the high speed and wide coverage of modern cellular networks. Featuring Ethernet, Serial (RS232/422/485), and USB 2.0 connectivity, the unit can interface with a diverse range of equipment used in a wide variety of vertical applications. The 6200 series also features built in GPS support and a dedicated ignition input making it ideal for vehicle applications. The device features integrated Zigbee with embedded antennas for multipoint wireless networking and multipurpose digital and analogue I/O ports.

• Designed and built for the toughest and most varied conditions in the world, the Australian environment.
• Over 30 Years of proven and respected Industry Experience in the Australian Telecommunications Industry.
• Australian Designed with quality resources from the world.
• Publicly listed company on the Australian Stock Exchange.
• Expertise support and customer focused staff.
• Up to date with technology and bringing to market the best quality technology available for Reliable Commercial use.