Select Page

EasySolar-II GX

The all-in-one solar power solution

Rising Connection_Victron energy logoThe Victron EasySolar-II GX integrates the following elements:
• A MultiPlus-II inverter/charger
• A SmartSolar MPPT -Tr solar charge controller
• A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.

KEY FEATURES

The all-in-one solar power solution

The Victron EasySolar-II GX integrates the following elements:

  • A MultiPlus-II inverter/charger
  • A SmartSolar MPPT -Tr solar charge controller
  • A GX device with a 2 x 16-character display.

These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.

Rising Connection_EasySolar-II GX 48V 3000VA GX (right)

Display and Wi-Fi

The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings.

Solar charge controller

The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/ off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.

Rising Connection_EasySolar-II-GX-48-3000VA-35-32-MPPT-250-70-GX-(connector-side_nw)

GX device

The integrated GX device includes:

  • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
  • A USB port
  • An Ethernet port
  • A VE.Direct port

The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. EasySolar-II GX 3 kVA

KEY FEATURES

Rising Connection_EasySolar-II GX 48V 3000VA GX (right)

 

The all-in-one solar power solution

The Victron EasySolar-II GX integrates the following elements:

  • A MultiPlus-II inverter/charger
  • A SmartSolar MPPT -Tr solar charge controller
  • A GX device with a 2 x 16-character display.

These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.

Display and Wi-Fi

The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings.

Rising Connection_EasySolar-II-GX-48-3000VA-35-32-MPPT-250-70-GX-(connector-side_nw)

Solar charge controller

The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/ off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.

GX device

The integrated GX device includes:

  • A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
  • A USB port
  • An Ethernet port
  • A VE.Direct port

The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. EasySolar-II GX 3 kVA

FEATURES

Rising Connection_diagram
Rising Connection_VRM app Rising Connection_VRM Portal

VRM app for Wi-Fi

Monitor and manage your Victron Energy system from your smart phone and tablet. Available for both iOS and Android.

VRM Portal

Our free remote monitoring website (VRM) will display all your system data in a comprehensive graphical format. System settings can be changed remotely via the portal. Alarms can be received by e-mail.

Rising Connection_Grid in-line topology

Grid in-line topology

The EasySolar-II GX will use excess PV power to charge the batteries or to feed power back into the grid and will discharge the battery or use power from the grid to supplement a shortage of PV power. In case of a power outage, the EasySolar-II GX will disconnect the grid and continue to supply the loads.

Loads that should shut down when AC input power is not available can be connected to a second output (not shown). These loads will be taken into account by the PowerControl and PowerAssist function in order to limit AC input current to a safe value.

Grid parallel topology

The EasySolar-II GX will use data from the external AC current sensor (must be ordered separately) or power meter to optimise self-consumption and, if required, to prevent grid feed. In case of a power outage, the EasySolar-II GX will continue to supply the critical loads.

Rising Connection_Grid parallel topology

Rising Connection_Current sensor

Current sensor 100A:50mA

To implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing.
Maximum current: 50 A resp. 100 A.
Length of connection cable: 1 m.

 

FEATURES

Rising Connection_diagram
Rising Connection_VRM app

VRM app for Wi-Fi

Monitor and manage your Victron Energy system from your smart phone and tablet. Available for both iOS and Android.

Rising Connection_VRM Portal

VRM Portal

Our free remote monitoring website (VRM) will display all your system data in a comprehensive graphical format. System settings can be changed remotely via the portal. Alarms can be received by e-mail.

 

Rising Connection_Grid in-line topology

Grid in-line topology

The EasySolar-II GX will use excess PV power to charge the batteries or to feed power back into the grid and will discharge the battery or use power from the grid to supplement a shortage of PV power. In case of a power outage, the EasySolar-II GX will disconnect the grid and continue to supply the loads.

Loads that should shut down when AC input power is not available can be connected to a second output (not shown). These loads will be taken into account by the PowerControl and PowerAssist function in order to limit AC input current to a safe value.

Rising Connection_Grid parallel topology

Grid parallel topology

The EasySolar-II GX will use data from the external AC current sensor (must be ordered separately) or power meter to optimise self-consumption and, if required, to prevent grid feed. In case of a power outage, the EasySolar-II GX will continue to supply the critical loads.

Rising Connection_Current sensor

Current sensor 100A:50mA

To implement PowerControl and PowerAssist and to optimise self-consumption with external current sensing.
Maximum current: 50 A resp. 100 A.
Length of connection cable: 1 m.

 

SPECIFICATIONS

EasySolar-II

24/3000/70-32 MPPT 250/70 GX

48/3000/35-32 MPPT 250/70 GX

48/5000/70-50 MPPT 250/100 GX

INVERTER/CHARGER

PowerControl & PowerAssist

Yes

Transfer switch

32 A

50 A

Maximum AC input current

32 A

50 A

Auxiliary output

32 A

50 A

INVERTER

Input voltage range

19 – 33 V

38 – 66 V

38 – 66 V

Output

Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0,1 %1

Cont. output power at 25 °C3

3000 VA / 2400 W

3000 VA / 2400 W

5000 VA / 4000 W

Cont. output power at 40 °C / 55 °C

2200 W / 1700 W

2200 W / 1700 W

3700 W / 3000 W

Maximum apparent feed-in power

2470W / 3000 VA

2470W / 3000 VA

4400 W / 5000 VA

Peak power

5500 W

5500 W

9000 W

Maximum efficiency

94%

95%

96%

Zero load power

13 W

11 W

18 W

Zero load power in AES mode

9W

7W

12 W

Zero load power in Search mode

3W

2W

2W

 CHARGER

AC Input

Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz

Charge voltage ‘absorption’

28.8 V

57.6 V

Charge voltage ‘float’

27.6 V

55.2 V

Storage mode

26.4 V

52.8 V

Maximum battery charge current

70 A

35 A

70 A

Battery temperature sensor

Yes

Programmable relay4

Yes

Protection2

a-g

VE.Bus communication port

For parallel and three phase operation, remote monitoring and system integration

General purpose com. port

Yes, 2x

SMARTSOLAR CHARGE CONTROLLER

Model

MPPT 250/70-Tr

MPPT 250/100-Tr

Maximum output current

70 A

100 A

Maximum PV power

2000 W

4000 W

5800 W

Maximum PV open circuit voltage

250 V

Maximum efficiency

99%

Self-consumption

20 mA

Charge voltage ‘absorption’, default

57.6 V

Charge voltage ‘float’, default

55.2 V

Protection2

a–e

 GENERAL

Interfaces

BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi

Remote on-off

Yes

Operating temp. range

-40 to +55 °C (fan assisted cooling) Max. altitude 2000 m

Humidity (non-condensing)

max 95 %

ENCLOSURE

Material & Colour

aluminium (blue RAL 5012)

Protection category

IP21

Battery-connection

M8 bolts

PV connection

M6 bolts

230 VAC-connection

Screw terminals 16 mm2 (6 AWG)

Weight

26 kg

26 kg

38.6 kg

Dimensions (h x w x d) mm

499 x 268 x 237

604 x 323 x 253

STANDARDS

Safety

EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2

Emission / Immunity

EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1,

IEC 61000-6-2, IEC 61000-6-3

 

1. Can be adjusted to 60 Hz

2. Protection key: a) output short circuit, b) overload, c) battery voltage too high, d) battery voltage too low, e) temperature too high, f) 230 VAC on inverter output, g) input voltage ripple too high

3. Non-linear load, crest factor 3:1

4. Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function.  AC rating: 230 V / 4 A, DC rating: 4 A up to 35 VDC and 1 A up to 60 VDC

SPECIFICATIONS

EasySolar-II

INVERTER/CHARGER:
24/3000/70-32 MPPT 250/70 GX
PowerControl & PowerAssist: Yes
Transfer switch: 32A
Maximum AC input current: 32A
Auxiliary output: 32A

48/3000/35-32 MPPT 250/70 GX
PowerControl & PowerAssist: Yes
Transfer switch: 32A
Maximum AC input current: 32A
Auxiliary output: 32A

48/5000/70-50 MPPT 250/100 GX
PowerControl & PowerAssist: Yes
Transfer switch: 50A
Maximum AC input current: 50A
Auxiliary output: 50A

INVERTER:
24/3000/70-32 MPPT 250/70 GX
Input voltage range: 19 – 33 V
Output: Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0,1 %1
Cont. output power at 25 °C3: 3000 VA / 2400 W
Cont. output power at 40 °C / 55 °C: 2200 W / 1700 W
Maximum apparent feed-in power: 2470W / 3000 VA
Peak power: 5500 W
Maximum efficiency: 94 %
Zero load power: 13 W
Zero load power in AES mode: 9W
Zero load power in Search mode: 3W

48/3000/35-32 MPPT 250/70 GX
Input voltage range: 38 – 66 V
Output: Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0,1 %1
Cont. output power at 25 °C3: 3000 VA / 2400 W
Cont. output power at 40 °C / 55 °C: 2200 W / 1700 W
Maximum apparent feed-in power: 2470W / 3000 VA
Peak power: 5500 W
Maximum efficiency: 95 %
Zero load power: 11 W
Zero load power in AES mode: 7W
Zero load power in Search mode: 2W

48/5000/70-50 MPPT 250/100 GX
Input voltage range: 38 – 66 V
Output: Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0,1 %1
Cont. output power at 25 °C3: 5000 VA / 4000 W
Cont. output power at 40 °C / 55 °C: 3700 W / 3000 W
Maximum apparent feed-in power: 4400 W / 5000 VA
Peak power: 9000 W
Maximum efficiency: 96 %
Zero load power: 18 W
Zero load power in AES mode: 12W
Zero load power in Search mode: 2W

CHARGER:
24/3000/70-32 MPPT 250/70 GX
AC Input: Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge voltage ‘absorption’: 28.8 V
Charge voltage ‘float’: 27.6 V
Storage mode: 26.4 V
Maximum battery charge current: 70 A
Battery temperature sensor: Yes
Programmable relay4: Yes
Protection2: a-g
VE.Bus communication port: For parallel and three phase operation, remote monitoring and system integration
General purpose com. port: Yes, 2x

48/3000/35-32 MPPT 250/70 GX
AC Input: Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge voltage ‘absorption’: 57.6 V
Charge voltage ‘float’: 55.2 V
Storage mode: 52.8 V
Maximum battery charge current: 35 A
Battery temperature sensor: Yes
Programmable relay4: Yes
Protection2: a-g
VE.Bus communication port: For parallel and three phase operation, remote monitoring and system integration
General purpose com. port: Yes, 2x

48/5000/70-50 MPPT 250/100 GX
AC Input: Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge voltage ‘absorption’: 57.6 V
Charge voltage ‘float’: 55.2 V
Storage mode: 52.8 V
Maximum battery charge current: 70 A
Battery temperature sensor: Yes
Programmable relay4: Yes
Protection2: a-g
VE.Bus communication port: For parallel and three phase operation, remote monitoring and system integration
General purpose com. port: Yes, 2x

SMARTSOLAR CHARGE CONTROLLER:
24/3000/70-32 MPPT 250/70 GX
Model: MPPT 250/70-Tr
Maximum output current: 70 A
Maximum PV power: 2000 W
Maximum PV open circuit voltage: 250 V
Maximum efficiency: 99%
Self-consumption: 20 mA
Charge voltage ‘absorption’, default: 57.6 V
Charge voltage ‘float’, default: 55.2 V
Protection2: a–e

48/3000/35-32 MPPT 250/70 GX
Model: MPPT 250/70-Tr
Maximum output current: 70 A
Maximum PV power: 4000 W
Maximum PV open circuit voltage: 250 V
Maximum efficiency: 99%
Self-consumption: 20 mA
Charge voltage ‘absorption’, default: 57.6 V
Charge voltage ‘float’, default: 55.2 V
Protection2: a–e

48/5000/70-50 MPPT 250/100 GX
Model: MPPT 250/100-Tr
Maximum output current: 100 A
Maximum PV power: 5800 W
Maximum PV open circuit voltage: 250 V
Maximum efficiency: 99%
Self-consumption: 20 mA
Charge voltage ‘absorption’, default: 57.6 V
Charge voltage ‘float’, default: 55.2 V
Protection2: a–e

GENERAL:
24/3000/70-32 MPPT 250/70 GX
Interfaces: BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi
Remote on-off: Yes
Operating temp. range: -40 to +55 °C (fan assisted cooling) Max. altitude 2000 m
Humidity (non-condensing): max 95 %

48/3000/35-32 MPPT 250/70 GX:
Interfaces: BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi
Remote on-off: Yes
Operating temp. range: -40 to +55 °C (fan assisted cooling) Max. altitude 2000 m
Humidity (non-condensing): max 95 %

48/5000/70-50 MPPT 250/100 GX
Interfaces: BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi
Remote on-off: Yes
Operating temp. range: -40 to +55 °C (fan assisted cooling) Max. altitude 2000 m
Humidity (non-condensing): max 95 %

ENCLOSURE: 
24/3000/70-32 MPPT 250/70 GX:
Material & Colour: aluminium (blue RAL 5012)
Protection category: IP21
Battery-connection: M8 bolts
PV connection: M6 bolts
230 VAC-connection: Screw terminals 16 mm2
(6 AWG)
Weight: 26 kg
Dimensions (h x w x d) mm: 499 x 268 x 237

48/3000/35-32 MPPT 250/70 GX:
Material & Colour: aluminium (blue RAL 5012)
Protection category: IP21
Battery-connection: M8 bolts
PV connection: M6 bolts
230 VAC-connection: Screw terminals 16 mm2
(6 AWG)
Weight: 26 kg
Dimensions (h x w x d) mm: 499 x 268 x 237

48/5000/70-50 MPPT 250/100 GX:
Material & Colour: aluminium (blue RAL 5012)
Protection category: IP21
Battery-connection: M8 bolts
PV connection: M6 bolts
230 VAC-connection: Screw terminals 16 mm2
(6 AWG)
Weight: 38.6 kg
Dimensions (h x w x d) mm: 604 x 323 x 253

STANDARDS
24/3000/70-32 MPPT 250/70 GX:
Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1,IEC 61000-6-2, IEC 61000-6-3

48/3000/35-32 MPPT 250/70 GX:
Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3

48/5000/70-50 MPPT 250/100 GX:
Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission / Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3

1. Can be adjusted to 60 Hz

2. Protection key: a) output short circuit, b) overload, c) battery voltage too high, d) battery voltage too low, e) temperature too high, f) 230 VAC on inverter output, g) input voltage ripple too high

3. Non-linear load, crest factor 3:1

4. Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function.  AC rating: 230 V / 4 A, DC rating: 4 A up to 35 VDC and 1 A up to 60 VDC